Part One: Materials

The Tools and Materials I used to make Daemon's new case.

Back to Main

Tools

1. A rotary tool with the following bits:

• 1/4"L 1/16"W Straight Carbide Cutter

• 1/8" Drill

• Steel Wire Brush

• Silicon Carbide Sanding Drums (w/ bit)

2. A drill with a 1/2" diameter bit

3. A Leatherman Supertool

                    -  OR  -

3. The following hand tools:

• Flat Head Screwdriver

• Phillips Head Screwdriver

• Needle-Nose Pliers

• Heavy-Gauge Wire Cutter

4. High-Temp Hot Glue Gun

5. EYE PROTECTION! (Use it!)

Materials

1. An IBM P70/P75 Travel Case (VERY hard to find) or equivalent 24"x16"x8" heavy plastic travel case

2. 1/8" bolts with locking nuts (about $5 for a box of 100)

3. Glue Sticks for Hot Glue Gun

4. Sacrificial Case with Motherboard Mounting Plate, Power Supply, ATX Backplate, and 5 1/4" Drive Brackets

5. 5 1/4" adapter for HDD and Floppy

6. Guts of one computer

On to part two!

Back to Main